Adjust cooling flow and water flow ( water ) according to operating data 根据操作参数调节冷却水量和水流量。
And , the cooling flow rate of the clearance between stator and rotor as well as the hole of rotor flange was obtained 获得了静盘与转盘间隙以及转盘外缘小孔的冷气流量。
The flow characteristics of rotor - stator cavity system with blade - cooling flow and disk - cooling flow was experimentally studied 摘要采用实验方法,对具有中心进气、两个出口的盘腔系统的流动特性进行了研究。
The experimental results show that : the blade cooling flow rate will increase with the total flow rate and rotating speed ; the ratio of the blade - cooling flow rate to the total flow rate will increase with decline of the total flow rate , and increases with the rotating speed 结果表明:盘面出流孔的流量随总流量或转速的增加而增加,该流量与总流量的流量比随总流量的增加而降低,随着转速增加而增加盘。
Measurements were made of system pressure , mass flow rate of steam , air , and cooling water , temperatures of condensing flow and cooling flow , and the water level of boiler . the major phenomena observed in the present experiment are similar to those by other investigators . the mass flow rate of steam , the system pressure and air content are the most important factors affecting steam condensation 实验结果表明,维持二次侧冷却水流量不变,无论对于纯净蒸汽还是含有空气的蒸汽冷凝,随着蒸汽发生器加热功率的增大(即蒸汽流量增大) ,有效冷凝段长度将加长;当蒸汽中含有少量空气,有效冷凝段长度也会明显加长;提高系统压力,有效冷凝段长度将缩短。
百科解释
A cooling flow occurs according to the theory that the intracluster medium (ICM) in the centres of galaxy clusters should be rapidly cooling at the rate of tens to thousands of solar masses per year.Fabian A.